Getting Started with MeshCore

Flash your firmware, configure your device, and prepare to join your first MeshCore network.

Join Discord Email

Quick Start

1. Choose Hardware 2. Flash Firmware 3. Connect Node 4. Configure Role 5. Join STMesh

1

Get Compatible Hardware

Start with supported LoRa hardware and a dependable power setup.

  • 915 MHz hardware profile for U.S. deployments
  • Antenna selected for your target coverage
  • USB cable and stable power source

MeshCore FAQ | MeshCore Supported Devices

2

Flash MeshCore Firmware

  1. Open the MeshCore Flasher.
  2. Connect your node via USB.
  3. Select the firmware role image you want.
  4. Flash and verify the installed version.

Tip: Do not unplug your node while flashing is in progress.

3

Connect to Your Node

Connection method depends on the firmware role you flashed.

  • BLE Companion: pair with iOS/Android app
  • USB Companion: connect through USB web interface
  • Repeater / Room Server: configure over USB

Download on iOS | Download on Android

4

Configure Radio and Node Settings

Your firmware image already sets the role. In this step, apply baseline radio and node settings, then tune for your location.

  • Region Preset: USA/Canada
  • Frequency: 910.525 MHz
  • BW/SF/CR: 62.5 kHz, SF7, CR tuned to deployment
  • Node Name: Add an identifiable name for local troubleshooting