Getting Started with Meshtastic

Flash your firmware, configure your device, and prepare to join your first Meshtastic network.

Join Discord Email

Quick Start

1. Choose Hardware 2. Flash Firmware 3. Install App 4. Configure Node 5. Join STMesh

1

Get Compatible Hardware

Start with a supported Meshtastic device and the basics you need for a clean deployment.

  • 915 MHz radio variant for U.S. operation
  • Antenna matched to your range goals
  • Reliable power source and USB cable

View official hardware list

2

Flash Meshtastic Firmware

  1. Open Meshtastic Web Flasher in Chrome or Edge.
  2. Connect your node over USB.
  3. Select the correct target hardware.
  4. Flash and wait for completion.

Tip: Keep the device powered and avoid disconnecting until the flash process finishes.

3

Install the App and Pair

Use the mobile app to pair over Bluetooth and validate that the node is healthy.

  • Pair via Bluetooth
  • Confirm firmware version

Download on iOS | Download on Android

4

Configure Recommended Settings

Set the basics first, then tune as you learn your local RF environment.

  • Role: CLIENT for most mobile nodes, ROUTER for fixed high sites
  • Region: United States or appropriate region
  • Preset: Long Range - Fast
  • Hop Limit: 3 is a practical starting point

Learn more about device roles